swd


I am happy to announce a new release of LibSWD-0.6! Most important feature of this release is the standalone Application with an example of Command Line Interface (CLI), FTDI driver and ARM Cortex-M3 Core Debug and Flash support demonstration. Please report issues via Ticket System. Have fun! 🙂

swd


Patches that integrate LibSWD with OpenOCD has been already sent, so the platform independent Serial Wire Debug in Open-Source becomes a reality! Mr. Gerrit takes care of the source code review part, while Mr. Jenkins takes care of proper binary build for various platforms and operating systems. This is the right moment to make use of developers mailing list for feedback, asking questions, blaming, testing, adding new features and voting to accept the patches, so the code becomes an integral part of the OpenOCD release! :-)

Orange Labs provided R&D environment for initial stages of the research. Warsaw University of Technology made this possible as part of my MSc and PhD thesis. Krzysztof Kajstura designed and provided his generic KT-LINK (FT2232H based) interface to work with. David Brownell first introduced the Transport layer in OpenOCD in 2010 to split Target from JTAG. Simon Qian was working in parallel on his own SWD implementation for a Versaloon interface (as part of intelligent firmware). Øyvind HarboePeter StugeSpencer Oliver, Rodrigo Rosa helped me on GIT usage and OpenOCD internals,  Freddie Chopin helped me a lot with commited patches to match OpenOCD coding standards, Akos Vandra helped me to test functionality as the program was created… and my other friends should be also noted here for their support 🙂

Power of the few outweights power of the many! Thank you for your support! 🙂

swd


LibSWD 0.5 is out! It brings mainly the rename of all function prefix due API conflicts with other existing solutions.

Please visit Project Website for more information 🙂

swd


LibSWD 0.4 is out! It brings various bugfixes and improvements, but most of all stable API to be used with OpenOCD and other external applications.

See Project Website for more information 🙂

swd


“LibSWD serial wire debug open framework for low-level embedded systems access” has been presented on FedCSIS 2012 international conference and the paper has been already published by IEEE Xplore Digital Library.

All my publications are listed on Google Scholar.

swd


I have started my works on implementing the Serial Wire Debug (kind of JTAG alternative for ARM-Cortex Cores) for Open-Source OpenOCD and UrJTAG utilities. You can watch the progress at:

http://stm32primer2swd.sf.net

Project type: Open
Status: Work in progress…

swd


Poniżej zamieszczam obraz wyprowadzeń układu STM32 oraz R-Link w zestawie uruchomieniowym STM32Primer2:

Typ: Otwarty
Status: Zakończony