<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	
	xmlns:georss="http://www.georss.org/georss"
	xmlns:geo="http://www.w3.org/2003/01/geo/wgs84_pos#"
	>

<channel>
	<title>computers &#8211; TOMASZ &quot;CeDeROM&quot; CEDRO (SQ7MHZ)</title>
	<atom:link href="https://www.tomek.cedro.info/topics/computers/feed/" rel="self" type="application/rss+xml" />
	<link>https://www.tomek.cedro.info</link>
	<description></description>
	<lastBuildDate>Fri, 17 Mar 2023 18:47:46 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	
<site xmlns="com-wordpress:feed-additions:1">201759287</site>	<item>
		<title>Apache NuttX RTOS PMC</title>
		<link>https://www.tomek.cedro.info/apache-nuttx-rtos-pmc/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Fri, 17 Mar 2023 18:47:41 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[DIY (Do It Yourself)]]></category>
		<category><![CDATA[electronics]]></category>
		<category><![CDATA[hardware]]></category>
		<category><![CDATA[mind log]]></category>
		<category><![CDATA[embedded]]></category>
		<category><![CDATA[ICT]]></category>
		<category><![CDATA[NuttX]]></category>
		<category><![CDATA[RTOS]]></category>
		<guid isPermaLink="false">https://www.tomek.cedro.info/?p=1963</guid>

					<description><![CDATA[It is my great honor to become a PMC (Project Management Committee) member in the Open-Source Apache NuttX RTOS [1]. Thank you for inviting me into this great community and totally amazing project! :-) NuttX is a real-time operating system (RTOS) with an emphasis on standards compliance and small footprint. Scalable from 8-bit to 64-bit [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1963</post-id>	</item>
		<item>
		<title>Python float color list to WebRGB</title>
		<link>https://www.tomek.cedro.info/python-float-color-list-to-webrgb/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Wed, 14 Dec 2022 06:28:11 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[Kivy]]></category>
		<category><![CDATA[python]]></category>
		<guid isPermaLink="false">https://www.tomek.cedro.info/?p=1940</guid>

					<description><![CDATA[You can easily convert&#160; float color list (i.e. used in Kivy [1]) to Web RGB in Python [2] with oneliner: c = [0.5019607843137255, 0.796078431372549, 0.7686274509803922, 1.0] rgb = '#%02X%02X%02X%02X' % tuple(int(255*i) for i in c) '#80CBC4FF' [1] https://kivy.org/ [2] https://www.python.org/]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1940</post-id>	</item>
		<item>
		<title>NuttX RTOS is now Apache TLP</title>
		<link>https://www.tomek.cedro.info/nuttx-rtos-is-now-apache-tlp/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Thu, 24 Nov 2022 13:40:34 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[DIY (Do It Yourself)]]></category>
		<category><![CDATA[electronics]]></category>
		<category><![CDATA[hall of fame]]></category>
		<category><![CDATA[hardware]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[DIY]]></category>
		<category><![CDATA[embedded]]></category>
		<category><![CDATA[NuttX]]></category>
		<category><![CDATA[RISC-V]]></category>
		<category><![CDATA[RTOS]]></category>
		<guid isPermaLink="false">https://www.tomek.cedro.info/?p=1921</guid>

					<description><![CDATA[My favorite NuttX RTOS [1] that is &#8220;Tiny Unix on MCU&#8221; has graduated to Apache Top-Level-Project [2], congratulations! :-) Apache NuttX [1] is a real-time operating system (RTOS) that emphasizes standards compliance and small footprint, usable in all but the tightest micro-controller environments. It runs on 8-bit, 16-bit, 32-bit, and 64-bit microcontrollers across RISC-V, ARM, [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1921</post-id>	</item>
		<item>
		<title>M2.NVM disk + PCI-E controller on FreeBSD</title>
		<link>https://www.tomek.cedro.info/m2-nvm-disk-pci-e-controller-on-freebsd/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Fri, 14 Jan 2022 20:59:46 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[DIY (Do It Yourself)]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[mind log]]></category>
		<category><![CDATA[modifications]]></category>
		<category><![CDATA[disk]]></category>
		<category><![CDATA[drive]]></category>
		<category><![CDATA[freebsd]]></category>
		<category><![CDATA[hdd]]></category>
		<category><![CDATA[m2]]></category>
		<category><![CDATA[nvm]]></category>
		<category><![CDATA[open-source]]></category>
		<category><![CDATA[sata]]></category>
		<category><![CDATA[ssd]]></category>
		<category><![CDATA[zfs]]></category>
		<guid isPermaLink="false">https://www.tomek.cedro.info/?p=1897</guid>

					<description><![CDATA[Modern laptops are quite expensive and hard to upgrade. While they are really handy to work in multiple places, they are not that efficient for advanced R&#38;D activities like virtualization and massive software development combined (I/O speeds highly affects overall performance and compilation times). I was wondering if M2.NVM disk over PCI-E controller could work [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1897</post-id>	</item>
		<item>
		<title>FreeBSD single user remount / rw</title>
		<link>https://www.tomek.cedro.info/freebsd-single-user-remount-rw/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Tue, 10 Aug 2021 10:52:20 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[freebsd]]></category>
		<category><![CDATA[remount]]></category>
		<guid isPermaLink="false">https://www.tomek.cedro.info/?p=1875</guid>

					<description><![CDATA[If you are using UFS you can remount the root while in single mode with mount -u w / If you are using ZFS you can remount the root while in single mode with zfs set readonly=off zroot Note: With ZFS there is no need to turn back readonly=on as this will keep read-only flag [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1875</post-id>	</item>
		<item>
		<title>BSD Chromium Audio/Mic</title>
		<link>https://www.tomek.cedro.info/bsd-chromium-audio-mic/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Mon, 09 Aug 2021 17:45:41 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[BSD]]></category>
		<category><![CDATA[chromium]]></category>
		<category><![CDATA[freebsd]]></category>
		<category><![CDATA[microphone]]></category>
		<category><![CDATA[problem]]></category>
		<category><![CDATA[sndio]]></category>
		<category><![CDATA[sndiod]]></category>
		<category><![CDATA[solution]]></category>
		<guid isPermaLink="false">https://www.tomek.cedro.info/?p=1871</guid>

					<description><![CDATA[If you encounter a problem with microphone in Chromium on FreeBSD (and other *BSD), this is because it uses sndio audio backend and probably default microphone is not the one you want to use. In my case /dev/dsp0 is the HDMI input/output thus no audio input. There is no need to start system wide sndiod. [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1871</post-id>	</item>
		<item>
		<title>FreeBSD + Zephyr RTOS + ESP32</title>
		<link>https://www.tomek.cedro.info/freebsd-zephyr-rtos-esp32/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Sun, 25 Jul 2021 09:45:35 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[DIY (Do It Yourself)]]></category>
		<category><![CDATA[electronics]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[ESP32]]></category>
		<category><![CDATA[Espressif]]></category>
		<category><![CDATA[freebsd]]></category>
		<category><![CDATA[west]]></category>
		<category><![CDATA[Xtensa]]></category>
		<category><![CDATA[ZEPHYR]]></category>
		<category><![CDATA[ZephyrRTOS]]></category>
		<guid isPermaLink="false">https://www.tomek.cedro.info/?p=1864</guid>

					<description><![CDATA[FreeBSD can natively emulate Linux ELF binaries. You can now bootstrap Linux espressif xtensa toolchain for ESP32 on FreeBSD under The Zephyr Project with west espressif install :-) https://github.com/espressif/esp-idf/pull/7226#event-5064755416]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1864</post-id>	</item>
		<item>
		<title>Make PDF small with GS</title>
		<link>https://www.tomek.cedro.info/make-pdf-small-with-gs/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Thu, 29 Apr 2021 22:12:28 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[compression]]></category>
		<category><![CDATA[GhostScipt]]></category>
		<category><![CDATA[GS]]></category>
		<category><![CDATA[PDF]]></category>
		<guid isPermaLink="false">https://www.tomek.cedro.info/?p=1832</guid>

					<description><![CDATA[With this trick you can make your PDF smaller even 10x with no noticable picture quality loss :-) gs -sDEVICE=pdfwrite -dCompatibilityLevel=1.4 -dPDFSETTINGS=/screen -dNOPAUSE -dBATCH -dQUIET -dDownsampleColorImages=true -dColorImageResolution=200 -dColorImageDownsampleType=/Bicubic -sOutputFile=output.pdf input.pdf]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1832</post-id>	</item>
		<item>
		<title>Xilinx USB JTAG Platform Cable Vivado Linux</title>
		<link>https://www.tomek.cedro.info/xilinx-usb-jtag-platform-cable-vivado-linux/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Fri, 09 Apr 2021 00:44:55 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[electronics]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[hardware]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[driver]]></category>
		<category><![CDATA[FGPA]]></category>
		<category><![CDATA[jtag]]></category>
		<category><![CDATA[linux]]></category>
		<category><![CDATA[udev]]></category>
		<category><![CDATA[usb]]></category>
		<guid isPermaLink="false">https://www.tomek.cedro.info/?p=1824</guid>

					<description><![CDATA[If you work with Xilnx Vivado Design Suite [1] for FPGA development using USB JTAG interface such as Xilinx USB Platform Cable [2] or its cheaper clone from WaveShare [3], everything seems to be connected properly, but it cannot find the Target for programming, you probably need to perform drivers setup manually [4]. Error message [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1824</post-id>	</item>
		<item>
		<title>Why Linux Sux?</title>
		<link>https://www.tomek.cedro.info/why-linux-sux/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Tue, 23 Feb 2021 23:07:14 +0000</pubDate>
				<category><![CDATA[bugs]]></category>
		<category><![CDATA[computers]]></category>
		<category><![CDATA[hall of shame]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[BSD]]></category>
		<category><![CDATA[DragonflyBSD]]></category>
		<category><![CDATA[freebsd]]></category>
		<category><![CDATA[linux]]></category>
		<category><![CDATA[NetBSD]]></category>
		<category><![CDATA[OpenBSD]]></category>
		<guid isPermaLink="false">https://www.tomek.cedro.info/?p=1798</guid>

					<description><![CDATA[Imagine you have a disk full of your precious data that you want to mount to a new Ubuntu Linux system and add user to match the existing home directory. # adduser user Adding user `user' ... Adding new group `user' (1000) ... Adding new user `user' (1000) with group `user' ... Creating home directory [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1798</post-id>	</item>
		<item>
		<title>Synaptics TouchPad on Panasonic CF-MX4</title>
		<link>https://www.tomek.cedro.info/synaptics-touchpad-on-panasonic-cf-mx4/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Sat, 30 Jan 2021 23:43:45 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[hall of fame]]></category>
		<category><![CDATA[hardware]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[development]]></category>
		<category><![CDATA[driver]]></category>
		<category><![CDATA[fix]]></category>
		<category><![CDATA[freebsd]]></category>
		<category><![CDATA[HID]]></category>
		<category><![CDATA[Panasonic]]></category>
		<category><![CDATA[Synaptics]]></category>
		<category><![CDATA[Toughbook]]></category>
		<category><![CDATA[unix]]></category>
		<category><![CDATA[Xorg]]></category>
		<guid isPermaLink="false">https://www.tomek.cedro.info/?p=1791</guid>

					<description><![CDATA[This wulf7 [1] is a really nice guy that helped me run full featured Synaptics TouchPad with FreeBSD on Panasonic Toughbook CF-MX4 [2][3]. Now it works for moused and libinput with all multitouch gestures like two or three finger scroll, scale, etc! The problem was in detection mechanism as device is connected over multiplexer with [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1791</post-id>	</item>
		<item>
		<title>Disable Comments in WordPress</title>
		<link>https://www.tomek.cedro.info/disable-comments-in-wordpress/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Sat, 30 Jan 2021 23:12:55 +0000</pubDate>
				<category><![CDATA[computer networks]]></category>
		<category><![CDATA[computers]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[admin]]></category>
		<category><![CDATA[sql]]></category>
		<category><![CDATA[wordpress]]></category>
		<guid isPermaLink="false">https://www.tomek.cedro.info/?p=1784</guid>

					<description><![CDATA[You can disable comments for existing posts using Bulk Edit, but this is not possible for existing media files. You can do both with a single SQL command : UPDATE wp_your_table_with_posts SET comment_status = 'closed'; You can disable comments for all new posts either by hand as administrator unchecking Settings / Discussion / Allow people [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1784</post-id>	</item>
		<item>
		<title>LimeSuite on FreeBSD</title>
		<link>https://www.tomek.cedro.info/limesuite-on-freebsd/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Sat, 09 Jan 2021 01:52:23 +0000</pubDate>
				<category><![CDATA[aerospace]]></category>
		<category><![CDATA[computers]]></category>
		<category><![CDATA[DIY (Do It Yourself)]]></category>
		<category><![CDATA[electronics]]></category>
		<category><![CDATA[ham radio]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[freebsd]]></category>
		<category><![CDATA[radio]]></category>
		<category><![CDATA[SDR]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1653</guid>

					<description><![CDATA[I have ported LimeSuite [1] to FreeBSD [2]. You can now work with LimeSDR [3] / LimeSDR-Mini [4] and others on my favourite OS. Please visit MyriadRF [5] for various radio inspirations. Have fun! :-) [1] https://github.com/myriadrf/LimeSuite[2] https://www.freebsd.org/[3] https://limemicro.com/products/boards/limesdr/[4] https://limemicro.com/products/boards/limesdr-mini/[5] https://myriadrf.org/]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1653</post-id>	</item>
		<item>
		<title>Panasonic Toughbook WWAN modem unlock</title>
		<link>https://www.tomek.cedro.info/panasonic-toughbook-wwan-modem-unlock/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Wed, 24 Jun 2020 20:56:22 +0000</pubDate>
				<category><![CDATA[computer networks]]></category>
		<category><![CDATA[computers]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[modifications]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1639</guid>

					<description><![CDATA[If you have Panasonic Toughbook laptop with no LTE/4G cellular modem and after you attach internal modem but it is still not visible in BIOS Setup nor in the Operating System, go to the Main / Optional Kit Configuration, use toughkit password, then set Wireless WAN ID = 15 (in case you use original Sierra [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1639</post-id>	</item>
		<item>
		<title>Damn slow Windows 10 boot</title>
		<link>https://www.tomek.cedro.info/damn-slow-windows-10-boot/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Thu, 31 Oct 2019 17:11:50 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[FAQ]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1635</guid>

					<description><![CDATA[If you encounter turtle slow Windows 10 boot time on a decent machine it may be caused by AMD/Radeon driver&#8217;s ULPS. Try the following:1. Launch REGEDIT.2. Search for &#8220;enableulps&#8221; key.3. Set its value from 1 to 0.4. Reboot and see if that helped :-)]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1635</post-id>	</item>
		<item>
		<title>Mounting external ZFS volume</title>
		<link>https://www.tomek.cedro.info/mounting-external-zfs-volume/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Sun, 08 Sep 2019 16:42:34 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[freebsd]]></category>
		<category><![CDATA[geli]]></category>
		<category><![CDATA[recovery]]></category>
		<category><![CDATA[zfs]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1628</guid>

					<description><![CDATA[If you need to perform a data recovery from an external ZFS [zfs] volume you may find those hinds helpful: Attach encrypted partition where ZFS pool resides with: geli attach /dev/your_device_partition Import ZFS pool at given mountpoint (/mnt/zfs): zpool import -af -R /mnt/zfs Modify mount point location for a given dataset that may have mountpoint [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1628</post-id>	</item>
		<item>
		<title>ZFS on SSD CAM/CRC errors</title>
		<link>https://www.tomek.cedro.info/zfs-on-ssd-cam-crc-errors/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Sun, 08 Sep 2019 16:33:14 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[cam]]></category>
		<category><![CDATA[crc]]></category>
		<category><![CDATA[error]]></category>
		<category><![CDATA[freebsd]]></category>
		<category><![CDATA[trim]]></category>
		<category><![CDATA[zfs]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1626</guid>

					<description><![CDATA[If you encounter lots of CAM/CRC errors when using encrypted ZFS on some SSD drives on FreeBSD, that is caused by TRIM. You need to disable it in boot loader prompt or add below line to /boot/loader.conf: vfs.zfs.trim.enabled=0]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1626</post-id>	</item>
		<item>
		<title>netsh winsock reset</title>
		<link>https://www.tomek.cedro.info/netsh-winsock-reset/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Sat, 06 Jul 2019 10:46:38 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[netsh]]></category>
		<category><![CDATA[service]]></category>
		<category><![CDATA[windows]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1620</guid>

					<description><![CDATA[If you encounter any strange network related behavior on a windows based pc, especially after windows update, use this to resolve most of the problems and save some time, remember to reboot pc afterwards ;-) netsh winsock reset]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1620</post-id>	</item>
		<item>
		<title>macOS Virtual Audio SoundFlower Loopback</title>
		<link>https://www.tomek.cedro.info/macos-virtual-audio-soundflower-loopback/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Thu, 02 May 2019 16:47:57 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[DIY (Do It Yourself)]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[hall of fame]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[Audio]]></category>
		<category><![CDATA[macOS]]></category>
		<category><![CDATA[open source]]></category>
		<category><![CDATA[Streaming]]></category>
		<category><![CDATA[Studio]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1609</guid>

					<description><![CDATA[SoundFlower [1] is amazing Free and Open-Source extension to macOS BSD that allows you to create Virtual Audio Device in order to Route and Record Applications Audio. This is especially important for activities like Online Streaming and Presentation/Lectures Recording. If you need more advanced Audio Routing with a nice GUI and lots of options try [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1609</post-id>	</item>
		<item>
		<title>GRUB Remember Last Boot Choice</title>
		<link>https://www.tomek.cedro.info/grub-remember-last-boot-choice/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Thu, 11 Apr 2019 02:13:06 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[boot]]></category>
		<category><![CDATA[grub]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1601</guid>

					<description><![CDATA[If you want GRUB to remember your last choice add: GRUB_DEFAULT=saved GRUB_SAVEDEFAULT=true to /etc/default/grub and run sudo update-grub to apply new configuration.]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1601</post-id>	</item>
		<item>
		<title>Blender Player Python</title>
		<link>https://www.tomek.cedro.info/blender-player-python/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Wed, 23 Jan 2019 22:45:54 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[DIY (Do It Yourself)]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[Virtual Reality]]></category>
		<category><![CDATA[Blender]]></category>
		<category><![CDATA[open source]]></category>
		<category><![CDATA[python]]></category>
		<category><![CDATA[virtual-reality]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1593</guid>

					<description><![CDATA[If you encounter a problem with running Python [python] scripts on a &#8220;bare&#8221; Blender Player [blender], make sure that both PYTHONHOME and PYTHONPATH are set correctly to match your needs. You can also use native Blender python with a simple shell script: #!/bin/sh export PYTHONHOME="/path/to/blender/python/" export PYTHONPATH=$PYTHONHOME"/bin" /path/to/your/blenderplayer $@ [python] https://www.python.org/[blender] https://www.blender.org/]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1593</post-id>	</item>
		<item>
		<title>bash filename and extenstion extraction</title>
		<link>https://www.tomek.cedro.info/bash-filename-and-extenstion-extraction/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Thu, 31 May 2018 11:06:59 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[FAQ]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1581</guid>

					<description><![CDATA[In case you need to separate a filename from an extension in bash here is a way: filename=$(basename -- "$fullfile") extension="${filename##*.}" filename="${filename%.*}"]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1581</post-id>	</item>
		<item>
		<title>Migrating from MS Office365 to Googe Suite</title>
		<link>https://www.tomek.cedro.info/migrating-from-ms-office365-to-googe-suite/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Thu, 31 May 2018 11:05:19 +0000</pubDate>
				<category><![CDATA[computer networks]]></category>
		<category><![CDATA[computers]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[cloud]]></category>
		<category><![CDATA[google]]></category>
		<category><![CDATA[gsuite]]></category>
		<category><![CDATA[migration]]></category>
		<category><![CDATA[office]]></category>
		<category><![CDATA[online]]></category>
		<category><![CDATA[suite]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1579</guid>

					<description><![CDATA[If you want to move a business from Microsoft Office365 to Google Suite, there is a nice migration utility in Google Suite Admin Console that helps you transfer all accounts data from Exchange Web Server or IMAP. In case you encounter an error here goes a list of error codes and troubleshooting guide [1]. I [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1579</post-id>	</item>
		<item>
		<title>binary file hexdump</title>
		<link>https://www.tomek.cedro.info/binary-file-hexdump/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Thu, 08 Feb 2018 21:52:45 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[DIY (Do It Yourself)]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[modifications]]></category>
		<category><![CDATA[binary]]></category>
		<category><![CDATA[dump]]></category>
		<category><![CDATA[file]]></category>
		<category><![CDATA[hex]]></category>
		<category><![CDATA[hexedit]]></category>
		<category><![CDATA[python]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1571</guid>

					<description><![CDATA[Sometimes you need to quickly create a hexeditor like dump of a binary file. HEXDUMP is your friend. It may be a standard Unix application or Python module. Unix hexdump use example: hexdump -Cv file.bin 00000000 12 01 00 02 ef 02 01 40 28 0d 04 02 00 10 01 02 &#124;.......@(.......&#124; 00000010 03 [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1571</post-id>	</item>
		<item>
		<title>Apple macOS 10.13 High Sierra Fail</title>
		<link>https://www.tomek.cedro.info/apple-macos-10-13-high-sierra-fail/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Sun, 31 Dec 2017 20:45:40 +0000</pubDate>
				<category><![CDATA[bugs]]></category>
		<category><![CDATA[computers]]></category>
		<category><![CDATA[hall of shame]]></category>
		<category><![CDATA[mind log]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[apple]]></category>
		<category><![CDATA[fail]]></category>
		<category><![CDATA[HighSierra]]></category>
		<category><![CDATA[macOS]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1564</guid>

					<description><![CDATA[Guys at Apple are either stoned or really working hard to make macOS as bad as Windows. macOS High Sierra (10.13) was probably designed by people that were really &#8220;high&#8221;. They removed TELNET utility that is second most valuable network testing utility after PING. Except for noticeable performance degradation glitches during video modeswitch and other [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1564</post-id>	</item>
		<item>
		<title>Added GOBI2000 support to FreeBSD U3G</title>
		<link>https://www.tomek.cedro.info/added-gobi2000-support-to-freebsd-u3g/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Fri, 01 Sep 2017 16:18:48 +0000</pubDate>
				<category><![CDATA[computer networks]]></category>
		<category><![CDATA[computers]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[3g]]></category>
		<category><![CDATA[freebsd]]></category>
		<category><![CDATA[GOBI]]></category>
		<category><![CDATA[gsm]]></category>
		<category><![CDATA[lte]]></category>
		<category><![CDATA[modem]]></category>
		<category><![CDATA[U3G]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1503</guid>

					<description><![CDATA[I have added support for Panasonic ToughBook CF-F9 U3G GOBI2000 to FreeBSD U3G kernel module [1]. I have added firmware for Panasonic CF-F9 and HP EliteBook 2740p along with gobi_loader updates [2] that are required for 3G modems to work. At first U3G module will create /dev/cuaU0 interface for QDL firmware load, then after successful [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1503</post-id>	</item>
		<item>
		<title>Python Matplotlib macOS backend</title>
		<link>https://www.tomek.cedro.info/python-matplotlib-macos-backend/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Tue, 25 Jul 2017 23:16:02 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[science]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[diagram]]></category>
		<category><![CDATA[macOS]]></category>
		<category><![CDATA[matplotlib]]></category>
		<category><![CDATA[python]]></category>
		<category><![CDATA[Qt]]></category>
		<category><![CDATA[virtualenv]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1481</guid>

					<description><![CDATA[Matplotlib is a nice Matlab-like environment for Python. If you encounter a backend related problem while using Matplotlib [1] on a Python Virtualenv [2], then you need to explicitly select one (i.e. backend : Qt5Agg) in a ~/.config/matplotlib/matplotlibrc (or directly in a matplotlib file located in current working directory) configuration file. Then remember to use [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1481</post-id>	</item>
		<item>
		<title>ARM mbed OS DAPLink pyOCD</title>
		<link>https://www.tomek.cedro.info/arm-mbed-os-daplink-pyocd/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Mon, 24 Jul 2017 09:00:45 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[DIY (Do It Yourself)]]></category>
		<category><![CDATA[electronics]]></category>
		<category><![CDATA[hardware]]></category>
		<category><![CDATA[mind log]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[arm]]></category>
		<category><![CDATA[free-software]]></category>
		<category><![CDATA[mbed]]></category>
		<category><![CDATA[open source]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1497</guid>

					<description><![CDATA[It is my great honor to join Free-and-Open-Source ARM mbed [1] development team! :-) [1] https://www.mbed.com]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1497</post-id>	</item>
		<item>
		<title>Docker and Travis are Linux only solutions</title>
		<link>https://www.tomek.cedro.info/docker-and-travis-are-linux-only-solutions/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Thu, 15 Jun 2017 18:13:58 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[automation]]></category>
		<category><![CDATA[build]]></category>
		<category><![CDATA[docker]]></category>
		<category><![CDATA[freebsd]]></category>
		<category><![CDATA[jenkins]]></category>
		<category><![CDATA[linux]]></category>
		<category><![CDATA[testing]]></category>
		<category><![CDATA[travis]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1473</guid>

					<description><![CDATA[If you wonder to use Docker [1] or Travis CI [2] for build test or more advanced automation, note that these are Linux [3] only solutions and will not work with other operating systems such as FreeBSD [4]. You may want to take a look at old good Jenkins [5] for wider application possibilities :-) [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1473</post-id>	</item>
		<item>
		<title>JTAGulator</title>
		<link>https://www.tomek.cedro.info/jtagulator/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Wed, 05 Apr 2017 18:08:04 +0000</pubDate>
				<category><![CDATA[bugs]]></category>
		<category><![CDATA[computers]]></category>
		<category><![CDATA[DIY (Do It Yourself)]]></category>
		<category><![CDATA[electronics]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[hall of fame]]></category>
		<category><![CDATA[hardware]]></category>
		<category><![CDATA[modifications]]></category>
		<category><![CDATA[science]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[arm]]></category>
		<category><![CDATA[debug]]></category>
		<category><![CDATA[hack]]></category>
		<category><![CDATA[jtag]]></category>
		<category><![CDATA[JTAGulator]]></category>
		<category><![CDATA[MIPS]]></category>
		<category><![CDATA[research]]></category>
		<category><![CDATA[reverse engineering]]></category>
		<category><![CDATA[security]]></category>
		<category><![CDATA[service]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1444</guid>

					<description><![CDATA[I just did a self-assembly of JTAGulator. This simple and amazing device indeed works and shortens JTAG pinout search from days to seconds. AMAZING! I have some spare devices to sale cheap in EU, if you want one let me know! :-) JTAGulator is an open source hardware tool, created by Joe Grand / Grand [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1444</post-id>	</item>
		<item>
		<title>FreeBSD PXE Network Install</title>
		<link>https://www.tomek.cedro.info/freebsd-pxe-network-install/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Sun, 05 Mar 2017 10:50:03 +0000</pubDate>
				<category><![CDATA[computer networks]]></category>
		<category><![CDATA[computers]]></category>
		<category><![CDATA[DIY (Do It Yourself)]]></category>
		<category><![CDATA[FAQ]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[boot]]></category>
		<category><![CDATA[bootloader]]></category>
		<category><![CDATA[DHCP]]></category>
		<category><![CDATA[dnsmasq]]></category>
		<category><![CDATA[freebsd]]></category>
		<category><![CDATA[network]]></category>
		<category><![CDATA[NFS]]></category>
		<category><![CDATA[PXE]]></category>
		<category><![CDATA[tFTP]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1398</guid>

					<description><![CDATA[Sometimes you need to perform a network installation (i.e. when no USB or DVD drive is allowed to boot, but you can boot PXE). In case of FreeBSD you can use DNSMASQ to serve the DHCP that will assign the initial client address and configuration along with PXE boot image served over tFTP. At this [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1398</post-id>	</item>
		<item>
		<title>LibSWD-0.7 RELEASE</title>
		<link>https://www.tomek.cedro.info/libswd-0-7-release/</link>
		
		<dc:creator><![CDATA[CeDeROM]]></dc:creator>
		<pubDate>Wed, 15 Feb 2017 22:30:31 +0000</pubDate>
				<category><![CDATA[computers]]></category>
		<category><![CDATA[DIY (Do It Yourself)]]></category>
		<category><![CDATA[electronics]]></category>
		<category><![CDATA[hall of fame]]></category>
		<category><![CDATA[hardware]]></category>
		<category><![CDATA[modifications]]></category>
		<category><![CDATA[science]]></category>
		<category><![CDATA[software]]></category>
		<category><![CDATA[arm]]></category>
		<category><![CDATA[BSD]]></category>
		<category><![CDATA[cortex]]></category>
		<category><![CDATA[cpu]]></category>
		<category><![CDATA[DAP]]></category>
		<category><![CDATA[debug]]></category>
		<category><![CDATA[embedded]]></category>
		<category><![CDATA[free-software]]></category>
		<category><![CDATA[LibSWD]]></category>
		<category><![CDATA[open source]]></category>
		<guid isPermaLink="false">http://www.tomek.cedro.info/?p=1388</guid>

					<description><![CDATA[It is my great pleasure to inform you folks that, almost after four years, I did a new release of LibSWD-0.7 [1], a low-level embedded systems access open framework. Special thanks goes to Andrew Parlane of Carallon Ltd [2] for his much appreciated contributions! Well now I feel like I need to invent some nice [&#8230;]]]></description>
		
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1388</post-id>	</item>
	</channel>
</rss>
