THE AUTO


21.11.2002
FROZEN
    Goals of this project:
  • convert cable-controlled toy into radio-controlled or even self-controlled toy
  • practical test of chipcon's radio uC - CC1010
  • construct my first robot
  • fun =)

21.11.2002
  • I will use original toy mechanics
  • As for now I will use AT89C2051 uC to control mechanics
  • I will use IRF9540 (greetz goes to mosfet!) transistors to drive toy motors. Just like in d-class amplifiers, motor will get high frequency square wave. By changing pulse width, we can change average voltage on motor, so by this we can control its speed.




Pocket Sap Plajer
THE AUTO


21.11.2002
FROZEN
    Goals of this project:
  • convert cable-controlled toy into radio-controlled or even self-controlled toy
  • practical test of chipcon's radio uC - CC1010
  • construct my first robot
  • fun =)

21.11.2002
  • I will use original toy mechanics
  • As for now I will use AT89C2051 uC to control mechanics
  • I will use IRF9540 (greetz goes to mosfet!) transistors to drive toy motors. Just like in d-class amplifiers, motor will get high frequency square wave. By changing pulse width, we can change average voltage on motor, so by this we can control its speed.